In recent years, global warming, climate change, and carbon emissions have emerged due to the uncontrolled use of fossil fuels and the lack of widespread use of renewable energy sources on a global scale. This research investigated specific energy consumption (SEC) and greenhouse gases (GHG) emissions (carbon dioxide [CO2] and nitrogen oxides [NOX]) during the drying of pear samples by five different types of dryers, namely, convective (CV), infrared (IR), microwave (MW), combined IR/CV, and MW/CV. Moreover, the quality properties of dried pears, such as shrinkage, rehydration (RR), and color change were determined. The results showed that the highest shrinkage (72.53%) and color change (ΔE = 33.41) values were obtained in CV drying at 50 °C and thickness of 2 mm and IR dryer 1000 W and thickness of 6 mm, respectively. The greatest rehydration rate (4.25) was also determined in MW/CV drying at 450 W and an air temperature of 60 °C. The lowest SEC was observed for the MW/CV dryer with a power of 630 W and air temperature 70 °C (20.25 MJ/kg), while the highest SEC (267.61 MJ/kg) was obtained in the CV drying (50 °C, sample thickness of 6 mm). The highest CO2 and NOX emissions (GT-GO power plant) were 280.45 and 1.55 kg/kg water in the CV dryer at 50 °C and a thickness of 6 mm. In conclusion, the increases in IR and MW power and temperatures led to reduced CO2 and NOX emissions, while the increases in sample thickness led to increase CO2 and NOX emissions.